Your position: Home / Gimbal/Handheld Stabilizer / DJI Stabilizer

DJI RONIN M Stabilized Handheld Gimbal System DJI-Ronin-M

DJI RONIN M Stabilized Handheld Gimbal System DJI-Ronin-M
    Please select the information you wantX
(10000 available)
  • Description
  • Reviews


DJI RONIN M Stabilized Handheld Gimbal System DJI-Ronin-M

Weighing just 5 pounds (2.3kg), about half the weight of the original Ronin, the slimmed down Ronin-M is small enough to fit into your backpack and take anywhere, yet strong enough to support camera setups weighing up to 8 pounds (3.6kg)

Save time and start shooting professionally stabilized video in under 5 minutes. Mount your camera to the Ronin-M, quickly balance it, and then tap a button. The upgraded ATS (Auto Tune Stability) technology is more precise than before and completes the tuning and balancing processes with no tools necessary. Easy and efficient.

Capture tight shots, even when you have almost no space to work, and easily transport your Ronin-M. The top handle bars quickly and easily twist off, allowing you to minimize its size, achieve different shooting configurations, and pack or unpack it in seconds

Increased rigidity is provided by a single, complete piece of fine-tooled magnesium that forms the U-shaped arm holding the camera plate. Only made possible by DJI’s large manufacturing reach and expertise, this unified design eliminates imperfections that are common in systems made of multiple pieces assembled together. This arm gives you not only greater stability but also reliability, as there is no potential for separate pieces to come loose or move apart.

Product Details

Built-In Functions

Three Operation Modes
· Underslung Mode
· Upright Mode
· Briefcase Mode
Built-in, independent IMU module
DJI Gimbal Drive Motors with Encoders
Bluetooth Module
USB Connection
2.4GHz Receiver
Temperature Sensor
DJI Advanced 32-Bit DSP Processor
D-Bus Receiver Supported

Camera Tray Dimensions

Maximum depth at center of mass on camera base plate: 120mm
Maximum height measured from top of camera base plate: 195mm
Maximum width: 160mm
Accessory Power Connections;
12V Regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1
GCU Input Power:4S Ronin-M Battery
Connections:2.4GHz Remote Controller, Blue tooth 4.0, USB 2.0
PC Assistant Software Requirements:
Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit);Mac OS X 10.9 or above
Mobile Assistant Software Requirements:Mobile Device: iOS 7.0 or above

Working Current
· Static current: 300mA (@16V)
· Dynamic current: 600mA (@16V)
· Locked motor current: Max 10A (@16V)
Operating Temperature:-15° C ~ 50° C (-5° F ~ 120° F)
Weight:2.3kg (5.07lb) fully loaded with handlebar
Gimbal Dimensions:500mm(W) x 210mm(D)x 420mm(H)

Item Packing


Average rating: 5.0
Share your thoughts with other customers
Write a review